View XM1001-QH-0G0T_608997.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

10.0-34.0 GHz Image Reject Mixer QFN, 4x4 mm
February 2007 - Rev 15-Feb-07
M1001-QH
Features
Fundamental Image Reject Mixer 6.0 dB Conversion Loss 20.0 dB Image Rejection +25.0 dBm Input Third Order Intercept (IIP3) 4x4 mm, QFN -- ROHS Compliant
General Description
Mimix Broadband's 10.0-34.0 GHz GaAs MMIC fundamental image reject mixer with high linearity has a conversion loss of 8.0 dB with a 20.0 dB image rejection across the band. I and Q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband. This MMIC uses Mimix Broadband's 0.15 m GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. The device comes in a low-cost 4x4 mm QFN surface mount plastic package. This device is well suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings
Gate Bias Voltage (Vg) Input Power (RF Pin) Input Power (IF Pin) Storage Temperature (Tstg) Operating Temperature (Ta) +0.3 VDC +20.0 dBm +20.0 dBm -65 to +165 OC -55 to +125 OC
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter Frequency Range (RF) Frequency Range (LO) Frequency Range (IF) RF Return Loss (S11) IF Return Loss (S22) LO Return Loss (S33) Conversion Loss (S21) LO Input Drive (PLO) Image Rejection Isolation LO/RF Isolation LO/IF Isolation RF/IF Input Third Order Intercept (IIP3) Gate Bias Voltage (Vg1)
Units GHz GHz GHz dB dB dB dB dBm dBc dB dB dB dBm VDC Min. 10.0 8.0 DC 12.0 -2.0 Typ. 10.0 TBD TBD 6.0 15.0 20.0 16.0 TBD TBD +25.0 -0.5
Max. 34.0 36.0 4.0 18.0 +0.1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
10.0-34.0 GHz Image Reject Mixer QFN, 4x4 mm
February 2007 - Rev 15-Feb-07
M1001-QH
XM1001-QH, Conversion Gain
Mixer Measurements
0 -2 -4 Conversion Gain (dB) -6 -8 -10 -12 -14 -16 -18 -20 10 15
"LSB" "USB" 20 25 RF (GHz) [IF=2GHz] 30 35 40
XM1001-QH, Image Rejection 0 -5 Image Rejection (dBc) -10 -15 -20 -25 -30 -35 -40 10 15 20 25 RF (GHz) [IF=2GHz] 30 35 40 "USB" "LSB"
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
10.0-34.0 GHz Image Reject Mixer QFN, 4x4 mm
February 2007 - Rev 15-Feb-07
M1001-QH
Physical Dimensions
(Note: Engineering designator is 20IRRFM0374)
Functional Schematic
GND 24 GND GND 1 2
0
GND 23
IF1 22
GND 21
VG 20
GND 19 18 GND
Pin Designations
Pin Number 1-3 4 5-8 9 10-14 15 16-19 20 21 22 23-24 Pin Name GND RF IN GND IF2 GND LO IN GND VG GND IF2 GND Pin Function Ground RF Input Ground Output IF 1 Ground LO Input Ground Gate bias Ground Output IF 1 Ground Nominal Value Units
17
GND GND
GND
3
16
-0.5
Volts
RF IN GND
4 5
90
15 14
LO IN
GND GND
GND
6 7 GND 8 GND 9 IF2 10 GND 11 GND 12 GND
13
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
10.0-34.0 GHz Image Reject Mixer QFN, 4x4 mm
February 2007 - Rev 15-Feb-07
M1001-QH
For Upper Side Band Operation (USB): With IF1 and IF2 connected to the direct port (0) and coupled port (90) respectively as shown in the diagram, the USB signal will reside on the isolated port. The input port must be loaded with 50 ohms. For Lower Side Band Operation (LSB): With IF1 and IF2 connected to the direct port (0) and coupled port (90) respectively as shown in the diagram, the LSB signal will reside on the input port. The isolated port must be loaded with 50 ohms.
App Note [3] USB/LSB Selection -
LSB
USB
IF2
IF1
Note: The coupled port can be used as an alternate input but the port location of the Coupled and Direct ports reverse.
An alternate method of Selection of USB or LSB:
USB
LSB
In Phase Combiner
In Phase Combiner
-90
o
-90o
IF2
IF1
IF2
IF1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
10.0-34.0 GHz Image Reject Mixer QFN, 4x4 mm
February 2007 - Rev 15-Feb-07
M1001-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. The package is a low-cost plastic package. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Typical Reflow Profiles Reflow Profile Ramp Up Rate Activation Time and Temperature Time Above Melting Point Max Peak Temperature Time Within 5 C of Peak Ramp Down Rate SnPb 3-4 C/sec 60-120 sec @ 140-160 C 60-150 sec 240 C 10-20 sec 4-6 C/sec Pb Free 3-4 C/sec 60-180 sec @ 170-200 C 60-150 sec 265 C 10-20 sec 4-6 C/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes. Part Number for Ordering XM1001-QH-0G00 XM1001-QH-0G0T XM1001-QH-EV1 Description Matte Tin plated RoHS compliant QFN 4x4 24L surface mount package in bulk quantity Matte Tin plated RoHS compliant QFN 4x4 24L surface mount package in tape and reel XM1001-QH Evaluation Board
We also offer this part with alternative plating. Please contact your regional sales manager for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.

▲Up To Search▲

Price & Availability of XM1001-QH-0G0T

	To Download XM1001-QH-0G0T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .